Would you like to react to this message? Create an account in a few clicks or log in to continue.


 
HomeSearchLatest imagesRegisterLog in

 

 Split rims torque settings

Go down 
AuthorMessage
ezza

ezza


Posts : 7570
Age : 116
Joined : 2007-01-29

Split rims torque settings Empty
PostSubject: Split rims torque settings   Split rims torque settings EmptyWed 23 Dec 2009, 10:18 am

BBS Split rims

BBS RM's 2 piece Split Rims
Size :- 15" and 16"
Stud Torque setting:- 14/18 Ft/Lds

BBS RS's 3 Piece Split Rims
Size :- 14"
Stud Torque setting :- 15/18 ft/lds

BBS RS's 3 Piece Split Rims
Size :- 15" and 16"
Stud Torque setting 22/24 ft/lds

BBS RS's 3 Piece Split Rims
Size :- 17" and 18"
Stud Torque Setting 24/26 ft/Lds

BBS LM 2 Piece Split Rims
Size :- 17", 18" and 19"
Stud Torque setting :- 24/26 ft/Lds

BBS LM-R 2 piece Split Rims
Size :- 19" and 20"
Stud Torque Setting:- 24/26 Ft/Lds

BBS RS 11 2 Piece Split Rims
Size :- 17" and 18"
Stud Torque Setting :- 22/24 Ft/Lds

BBS RX 11 2 Piece Split Rims
Size :- 15",16" ,17" , 18" ,19" and 21"
Stud Torque Settings :- 22/24 Ft/Lds

BBS RK's 2 Piece Split Rims
Size :- 18"
Stud Torque Settings:- 22/24 Ft/Lds

BBS RS-GT 2 Piece Split Rims
Size :- 18" , 19" and 20"
Stud Torque Settings :- 22/24 Ft/Lds

BBS E30,E50,E26,E87,E28,E88,E68 2 and 3 Piece Split Rims
Size :-13" , 14" , 15" , 16" , 17" , 18" , 19" , 20" and 21"
Stud Torque Settings :- 22/24 Ft/Lds

BBS RC's 2 Piece Split rims***
Size :- 17" and 18"
Stud Torque Settings :- 22/24 Ft/Lds
*** :- These wheels have a spline mount in the main basket section and on the studs, once the rear nut has been loosened they need to be hammered or pressed out.


All above wheels will use a 8mm 12 point multi point socket and a 10mm 12 point multi point socket on the rear nut.
or a 8mm Spline socket.
These items are avaliable from halfords, We use Snap-on tools when spliting so that you don't get cam out,
ie the socket slipping off the stud or nut.


OZ Split Rims

All OZ Split Rims come from the factory with OZ's own specially made studs.
The studs look like the usual studs but they are slightly different, therefore a special
socket for the stud head and the rear nut are required,
also OZ wheels with Spline studs require a special spline drive socket.

Stud head :- 8mm 10 Point Socket
Stud Nut :- 10mm 10 Point socket
Spline Stud :- 8mm 10 Point Spline

All OZ Split rims used 12.9 High tensils studs, way over the strength that was required but thats what they used.
There for if using the original studs on your re-build all OZ wheels have a Stud Torque Setting of :- 22/24 Ft/Lds
If using after market studs a Stud Torque Setting of :- 22/24 Ft/Lds is more than adiquite


We advise that when spliting OZ split rims,
if the studs are not re-usable replace them with after market studs that are used on BBS Split rims.

Rial Split Rims


Rial Daytona Race 2 piece split rims
Size :- 18" , 19" , 20" and 22"
Stud Torque Settings :- 22/24 Ft/Lds

Compomotive


size :- 15" 3 Piece split Rims

26/28 Ft/Lds
this is due to the fewer studs holding the wheel together.

Please use new studs and nuts when rebuilding, 10.9 high tensile studs and nuts, this is due to the high torque setting required




Note:-
When replacing studs on Split Rims, the studs should be marked with 10.9, this shows that they are high tensil are are top quality.
Thread lock should be used on all stud threads when re-building.
Back to top Go down
 
Split rims torque settings
Back to top 
Page 1 of 1
 Similar topics
-
» 4x100 fake split rims for winter?
»  SSR Split Rims in 14" 4x100 for sale on Civic life
» Genuine BBS RS 043 3 Piece split rims 5x114.3 15x6.5j ET 36
» SSR/Watanabe RS Eight II 2 piece split rims 4x100 with tyres
» B series torque specs

Permissions in this forum:You cannot reply to topics in this forum
 :: Car related :: Usefull links-
Jump to: