| My Integra SiR-G | |
|
+15Ned Powelly Thebooosh...! big-al Benny pallett lance Aky mart609 tesh Michael Dave_t ezza Attley Stokes 19 posters |
|
Author | Message |
---|
tesh
Posts : 2085 Age : 35 Location : Dudley, Westmidlands Joined : 2007-01-29
| Subject: Re: My Integra SiR-G Wed 21 Sep 2011, 6:07 pm | |
| If that header works anything like the JDM 4-1 I had on, the one I think Ned has on his MB6 you will love this. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Thu 22 Sep 2011, 2:39 am | |
| - tesh wrote:
- If that header works anything like the JDM 4-1 I had on, the one I think Ned has on his MB6 you will love this.
I'm not 100% sure it will fit, the collector is 2.5" I'll test fit it once I finish polishing it. Thank you Duane for the pic from JAE | |
|
| |
Lee_EP82
Posts : 201 Joined : 2010-12-07
| Subject: Re: My Integra SiR-G Thu 22 Sep 2011, 3:38 am | |
| I dont mind being the sausage in that sandwich big boy. Oooo Stokesy that looks fresh i havent seen this in person yet must see | |
|
| |
pallett
Posts : 554 Joined : 2009-10-09
| Subject: Re: My Integra SiR-G Thu 22 Sep 2011, 6:24 am | |
| looking sharp'ie' on those rims!! | |
|
| |
Michael
Posts : 730 Age : 31 Location : Northants Joined : 2008-08-08
| Subject: Re: My Integra SiR-G Thu 22 Sep 2011, 7:46 am | |
| | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Fri 23 Sep 2011, 1:07 am | |
| - pallett wrote:
- looking sharp'ie' on those rims!!
I like that | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Fri 23 Sep 2011, 1:09 am | |
| | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Fri 23 Sep 2011, 1:13 am | |
| Picked up some plugs, fuel filter and rear discs and pads today. Already fitted the plugs and filter, just going to wait for an other dry day to do the brakes. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Sun 25 Sep 2011, 7:25 pm | |
| Fitted the manifold yesterday, you can feel a slight difference although it hangs too low I think I'm going to look out for a '98 Spec manifold to help with the clearance issues too.
Last edited by Stokes on Sun 23 Oct 2011, 10:48 am; edited 1 time in total | |
|
| |
Thebooosh...!
Posts : 319 Joined : 2009-10-29
| Subject: Re: My Integra SiR-G Sun 25 Sep 2011, 8:39 pm | |
| Stokes you wanna buy manifold? Il be buying a new one soon, Fitment on mine is perfect and is jasma stamped too | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Sun 25 Sep 2011, 8:43 pm | |
| - Thebooosh...! wrote:
- Stokes you wanna buy manifold?
Il be buying a new one soon,
Fitment on mine is perfect and is jasma stamped too What size collector is it? You thought about what track yet? | |
|
| |
Thebooosh...!
Posts : 319 Joined : 2009-10-29
| Subject: Re: My Integra SiR-G Sun 25 Sep 2011, 9:07 pm | |
| Its 2.5 collector.
Well id like to go snetterton but il do whatever, where you thinking? | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Sun 25 Sep 2011, 11:10 pm | |
| - Thebooosh...! wrote:
- Its 2.5 collector.
Well id like to go snetterton but il do whatever, where you thinking? I'll have a look what clearance is like, link me up with the snetterton booking info. | |
|
| |
tesh
Posts : 2085 Age : 35 Location : Dudley, Westmidlands Joined : 2007-01-29
| Subject: Re: My Integra SiR-G Fri 30 Sep 2011, 3:31 am | |
| - Stokes wrote:
- The fitment is shocking, only one of the two collector bolts are in as the other is way out of alignment.
I had this issue when I fitted a 4-1 you will see on the DE-CAT where it was cut, bolted to the downpipe first for correct fitment then re-welded. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Fri 30 Sep 2011, 7:24 am | |
| - tesh wrote:
- Stokes wrote:
- The fitment is shocking, only one of the two collector bolts are in as the other is way out of alignment.
I had this issue when I fitted a 4-1 you will see on the DE-CAT where it was cut, bolted to the downpipe first for correct fitment then re-welded. Yeah, I wandered why it was welded. Going to buy an adjustable one I think. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Fri 30 Sep 2011, 7:24 am | |
| I pulled the plastics out in the search for my shock sensor for my alarm and turned it down a touch, I also disconnected the SRS wire going into the cluster then cleaned everything before putting it all back in.
Last edited by Stokes on Sun 23 Oct 2011, 10:49 am; edited 1 time in total | |
|
| |
Lee_EP82
Posts : 201 Joined : 2010-12-07
| Subject: Re: My Integra SiR-G Fri 30 Sep 2011, 9:02 am | |
| I hope you fitted the steering wheel correctly this time unlike palletts | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Fri 30 Sep 2011, 10:11 am | |
| - Lee_EP82 wrote:
- I hope you fitted the steering wheel correctly this time unlike palletts
It's unbelievable but this boss is stuck on too lol | |
|
| |
pallett
Posts : 554 Joined : 2009-10-09
| Subject: Re: My Integra SiR-G Fri 30 Sep 2011, 10:19 am | |
| Lol he has actually done the same thing as he did to mine, he fitted it a few weeks back went to take it off and cross threaded it again!! | |
|
| |
Lee_EP82
Posts : 201 Joined : 2010-12-07
| Subject: Re: My Integra SiR-G Sat 01 Oct 2011, 3:08 am | |
| LMFAO theres really no hope with this kid. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Sat 15 Oct 2011, 2:38 am | |
| Got the boss off, it didn't jam on as much as Palletts. The MOMO is for sale and the standard wheel is back on. Going to try and get over to Teshs this weekend and collect the spoiler, then throw it on to see how it looks. I finally got round to swapping the rear discs and pads too, just the fronts to replace now as they're past their best. I bought a Tegiwa De-Cat and a '96 spec manifold. The blowing issues are now all sorted and the exhaust is 2.5" all the way through. Also just paid for my order from America, I'll update when it arrives! | |
|
| |
Sukhy96
Posts : 736 Age : 33 Joined : 2010-08-10
| Subject: Re: My Integra SiR-G Sat 15 Oct 2011, 3:11 am | |
| Did you get the mani from HCF?
Sweet update man, must feel alot better and breathe better too. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Sat 15 Oct 2011, 7:06 am | |
| - Sukhy96 wrote:
- Did you get the mani from HCF?
Sweet update man, must feel alot better and breathe better too. Nah I got one off Dom, it feels much better than the B16 manifold that was on it. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Wed 19 Oct 2011, 5:27 am | |
| Started preparing the car for underseal today. This is how far I got until I had to get ready for college. Got the car secure on axle stands, removed liners and front bumper then disconnected the ABS sensors. | |
|
| |
Stokes
Posts : 1022 Age : 33 Joined : 2009-12-09
| Subject: Re: My Integra SiR-G Fri 21 Oct 2011, 4:54 am | |
| While the car is up in the air I treated it to an oil change and a thermal gasket for my new inlet manifold. Managed to get the front of the car undersealed today, pulled the wings off, dropped the suspension down then cleaned and painted. | |
|
| |
Sponsored content
| Subject: Re: My Integra SiR-G | |
| |
|
| |
| My Integra SiR-G | |
|